These custom flat bottom bags are intended for nuts, granola and comparable dry products that benefit from a structured standing pack. The reference image shows tall gold and red pouches with broad front faces and a box-style profile. Compared with a simple bottom-gusset pouch, a flat bottom design distributes volume across the base and side panels, creating more surfaces for artwork. The final dimensions still depend on the product’s bulk density, particle size and target weight.
Dry mixes and irregular pieces can settle differently, making nominal bag volume an unreliable sizing method. Flat bottom pouch engineering starts with a filled sample or density data so the base, side panels and headspace work together. The format also organizes front, back and side artwork. Protection against moisture, oxygen, aroma or light must be specified separately, because the pouch shape alone does not establish shelf-life performance.
| Specification item | Project inputs |
|---|---|
| Capacity | Target weight, bulk density, piece size, settling behavior and required headspace |
| Base and panels | Width, height, side gussets and flat-bottom geometry confirmed from a filled sample |
| Closure | Top seal, zipper or other feature positioned around filling and consumer use |
| Material candidates | PET, BOPP, PA, PE, CPP, metallized film, foil or kraft layers subject to project review |
| Appearance | Gloss, matte, metallic or kraft presentation after artwork and process confirmation |
| Tests | Agreed seal, filled-pack stability, transport and storage checks |
Our packaging services cover the design, material and manufacturing steps required for this format.
Meisheng Packaging can coordinate structural sizing with artwork, material engineering and the chosen printing route. That is especially useful for flat bottom bags, where side-panel alignment and base geometry affect both capacity and appearance. Compare the design with other food and dry-product pouch formats before committing to the structure.
Start with the actual product, target weight and bulk density. Piece shape and settling can change the required volume. A filled sample or representative material is preferable to choosing size from a weight chart, because two products at the same weight can occupy very different volumes.
The required structure depends on oil content, aroma, moisture and oxygen targets, storage conditions and filling temperature. Candidate polymer, metallized or foil laminates can be compared, but a final recommendation requires the actual product brief and agreed testing. No single structure fits every recipe.
A zipper may be included when repeated opening is part of the intended use. Its position must leave room for filling, top sealing and artwork. The zipper does not replace the first seal and does not create a universal shelf-life result after opening.
Send the target weight, product density or sample, preferred dimensions and artwork through Contact Us. Meisheng Packaging can review capacity, structure and open validation requirements before quoting.